
Quick start
I want to try LoRa & Meshtastic
Pre-flashed starter kits for learning and small pilot setups. Checkout through our Shopee store.
Starter kitsIoT & wireless hardware
LoRa, LoRaWAN, and Meshtastic hardware for makers, developers, and small-scale deployments — supplied by Cubicore and available through Elliztronics.
Our partnership
Elliztronics is the official selling partner of Cubicore for selected IoT and wireless hardware. Cubicore supplies its own LoRa, LoRaWAN, and Meshtastic products along with selected third-party options, and Elliztronics makes them available to local buyers through Shopee and direct orders.
Cubicore owns the product and the stock. Elliztronics handles the local sales, support, and fulfillment.
Supplies the hardware
An IoT and wireless electronics brand. It develops and supplies its own products alongside selected third-party hardware.
Curates the lineup
Cubicore curates a range of compatible wireless hardware from other manufacturers alongside its own product line.
Sells locally
The customer-facing seller, Shopee store, and general sales partner for Cubicore hardware in the Philippines.
Where to start
Choose a path and we'll point you to the right hardware. Not sure yet? Send us a message and we'll help.

Quick start
Pre-flashed starter kits for learning and small pilot setups. Checkout through our Shopee store.
Starter kits
Deployment
LoRaWAN gateways and the portable Cubicore Gateway Pocket for pilots and selected small-site rollouts.
Gateways
Custom build
Nodes, sensors, mounts, and enclosures shaped around your own project or module. Let's discuss it.
Custom & insideProduct catalog
Availability varies — some items are ready to order, others are on request or configured per deployment. Every label below tells you how to get it.

Starter kit
RAK4631 core module on a RAK19007 base board, pre-flashed with Meshtastic. Includes LoRa and BLE antennas and a USB cable.

Starter kit
RAK3112 core module on a RAK19003 mini base board, pre-flashed with Meshtastic. Includes antenna accessories and a USB Type-C cable.

Gateway
A compact, portable dual-channel LoRaWAN-compatible gateway for learning, pilots, and selected small-site deployments.

Gateway
9xx MHz LoRaWAN gateway without LTE. Frequency plan — such as AS923 — depends on the specific model.

Gateway
9xx MHz LoRaWAN gateway with LTE Cat 1 and external antenna support.

RF accessory
Flexible rubber-coated whip for LoRa, LoRaWAN, and Meshtastic in SMA or RP-SMA. Verify the connector before ordering.

RF accessory
Adapter and pigtail options to match your board or module connector. Availability and fit are confirmed before ordering.

Node
Node options for sensing and telemetry on a LoRaWAN network. Availability is expanding.

Development
Development hardware for building your own node or gateway. Selection is confirmed per request.

Enclosure
Cases designed to house gateways, nodes, and development hardware — locally designed and 3D printed.

Mounting
Mounting, panel, and pole options shaped around your device and installation. Designed to your requirements.
Designed for philippine deployment
A compact gateway for learning, pilots, and selected small-site deployments.
Key product details at a glance.
| Operation | Dual-channel LoRaWAN-compatible |
| Deployment | Philippine AS923-3 |
| Backhaul | Wi-Fi, Bluetooth provisioning |
| Antennas | Internal omni (LoRa, Wi-Fi, BT) — no external connector |
| Ports | 2 × USB Type-C |
| Enclosure | PETG, ~100 × 70 × 25mm |
| Power | 5V / 2A USB-C adapter (not included) |
Philippine configuration
| Frequency plan | AS923 Group 3 |
| Specification | LoRaWAN 1.0.4 · RP002 1.0.2 |
| Frequencies | 916.600 / 916.800 MHz |
| Spreading factor | SF10 · 125kHz |
| ADR | Disabled |
| Dwell time | Disabled |
| Tested server | The Things Network |
Before you buy
Built for the region
The Gateway Pocket ships tuned for deployments here — the AS923-3 frequency plan, LoRaWAN 1.0.4, and regional parameters that suit local setups.
Beyond the hardware
For deployments, network setup, and full platform guidance, visit Cubicore for the complete picture.
Need an enclosure?
We design and 3D print cases, mounts, and brackets around your specific hardware — from a single node to a full deployment.